Fog Lamp Replacement - Front (Z71)

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Disconnect the electrical connector from the fog lamp.




2. Remove the nuts from the fog lamp.




3. Remove the fog lamp from the front bumper fascia.




4. Remove the fog lamp bulb from the fog lamp, turning counterclockwise, if required.

INSTALLATION PROCEDURE




1. Install the fog lamp bulb to the fog lamp, turning clockwise, if required.




2. Install the fog lamp to the front bumper fascia.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the nuts to the fog lamp.

Tighten
Tighten the nuts to 2 N.m (18 lb in).




4. Connect the electrical connector to the fog lamp.

For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes