Side SIR System Description

The side SIR system consists of the following components:
^ AIR BAG indicator located in the Instrument Panel Cluster (IPC)
^ Inflatable restraint Sensing And Diagnostic Module (SDM)
^ Inflatable restraint side impact modules (LF/RF)
^ Inflatable restraint Side Impact Sensors (SIS) (left/right)
^ Inflatable restraint wiring harnesses

The side impact modules are located in the outside portion of the front seat backs. The side impact modules contain a housing, inflatable air bag, initiating device, and a canister of gas generating material. The initiator is pant of the side impact module deployment loop. When a side impact of sufficient force occurs the SIS detects the impact and sends a signal to the SDM. The SDM compares the signal received from the SIS to a value stored in memory. When the generated signal exceeds the stored value, the SDM will cause current to flow through the side deployment loop deploying the side air bag. The SDM, side impact modules and the connecting wires makeup the side deployment loops. The SDM continuously monitors the deployment loops for malfunctions and turns the AIR BAG indicator ON if a fault is present.

Each side impact module is equipped with a shorting bar located on the connector of the module. The shorting bar shorts the side impact module deployment loop circuitry to prevent unwanted deployment of the air bag when it is disconnected.