Steering Shaft, Lower Bearing & Jacket - Assemble

Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle (Column Shift Standard)

Notice: Refer to Fastener Notice in Service Precautions.





1. Attach the steering column support assembly (2) to the steering column jacket assembly (3) with 4 TORX (R) head screws (1).
- Tighten the screws to 17 Nm (13 ft. lbs.).





2. Install the steering shaft assembly (1) into the steering column support assembly (2).





3. Install the adapter and bearing assembly (1) onto the steering column jacket assembly.
4. Install the linear shift assembly.
5. Install the turn signal and multifunction switch assembly.
6. Install the electronic lock module assembly.
7. Install the steering column into the vehicle.
8. Install the steering wheel onto the steering column.
9. Enable the inflatable restraint steering wheel module.