55. Reverse Input Clutch Bushing Replacement

Removal Procedure

^ Tools Required
- J 25019 Bushing Service Set
- J 34196B Bushing Service Set
- J 7004-1 Universal Remover
- J 8092 Driver Handle





1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
^ Damaged or worn bushings
^ Surface on the hub and outer housing
^ Leak at the weld





2. Using the J 25019-16 with the J 7004-1, remove the reverse input clutch front bushing (603).





3. Using the J 25019-4 with the J 8092, remove the reverse input clutch rear bushing (606).

Installation Procedure





1. Using the J 25019-9 with the J 8092, install a reverse input clutch front bushing (603).





2. Using the J 34196-3 with the J 8092, install a reverse input clutch rear bushing (606).