C0263

DTC C0263





Circuit Description
When the brake switch is closed (brake released), the master cylinder pressure sensor signal voltage is low. When the brake switch is open, the master cylinder pressure sensor signal voltage increases.

Conditions for Running the DTC
The ignition is ON.

Conditions for Setting the DTC
^ The brake switch is detected as closed.
^ The master cylinder pressure is detected as being above 862 kPa (125 psi) for 500 milliseconds.

Action Taken When the DTC Sets
^ The EBCM disables the VSES.
^ The message center displays the SERVICE STABILITY SYSTEM message.

Conditions for Clearing the DTC
^ The conditions for setting the DTC are no longer present (the DTC is not current) and you use the scan tool Clear DTCs function.
^ The current DTC clears when a DTC sets which directly indicates a brake switch or master cylinder pressure sensor malfunction.

Diagnostic Aids
Thoroughly inspect connections or circuitry that may cause an intermittent malfunction.