Radio Antenna Module Cable Replacement (Between Both Modules)

REMOVAL PROCEDURE




1. Lower the rear of the headliner. Refer to Headliner Replacement.
2. Remove the cable connector from the radio control module (3).
3. Remove the cable connector from the radio antenna module (2).
4. Remove cable from the roof cross member by removing the cable retainer clips (1).
5. Remove the cable from the vehicle.

INSTALLATION PROCEDURE




1. Install the cable to the roof cross member by pushing in the retainer clips (1).
2. Connect the cable connector to the radio antenna module (2).
3. Connect the cable connector to the radio control module (3).
4. Install the headliner.