Glove Compartment: Service and Repair

Compartment Replacement - IP

Removal Procedure




1. Close the IP compartment door.
2. Drill out the 2 rivets (2).
3. Remove IP storage compartment door retaining screws (1) from the instrument panel.
4. Remove the IP compartment door.

Installation Procedure




1. Install the IP compartment door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the IP compartment retaining screws (1) to the instrument panel.

Tighten the screws to 1.9 N.m (17 lb in).