Sunroof Replacement

Sunroof Replacement

Removal Procedure

1. Remove the sunroof finishing lace.
2. Remove the headliner.




3. Remove the drain hoses.
4. Disconnect the electrical connectors.
5. Remove the 9 bolts retaining sunroof module.
6. Remove the module from vehicle.

Installation Procedure




1. Install the module to the vehicle.





Notice: Refer to Fastener Notice in Service Precautions.

2. Loosely install the 9 bolts retaining the module to the roof.
Use a drill bit to align the 2 holes A and B.

Tighten the 9 bolts in the sequence shown to 9 N.m (80 lb in).

3. Connect the electrical connectors.
4. Install the drain hoses.
5. Install the headliner.
6. Install the finishing lace.
7. Synchronize the sunroof motor if necessary. Refer to Sunroof Motor Synchronization.