Spare Tire Carrier: Service and Repair

Tire Hoist and Shaft Replacement

Removal Procedure





1. Remove the spare wheel stowage lock cylinder.





2. Remove the spare tire from the hoist.
3. Raise and support the vehicle. Refer to Vehicle Lifting.





4. Remove the spare tire wheel hoist guide retaining clips from the bumper (1).





5. Remove the spare wheel hoist shaft guide (2) from the bumper.





6. Remove the spare wheel hoist shaft guide from the spare wheel hoist.





7. Remove the bolt.
8. Remove the hoist from the bracket.

Installation Procedure
1. Install the hoist to the crossmember.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the bolt.
Tighten the bolt to 40 Nm (30 ft. lbs.).





3. Install the spare wheel hoist shaft guide from the spare wheel hoist.





4. Install the spare wheel hoist shaft guide (2) to the bumper.





5. Install the spare wheel hoist shaft guide retaining clips to the bumper (1).





6. Install the spare tire to the hoist.





7. Remove the safety stands.
8. Lower the vehicle.
9. Install the spare wheel stowage lock cylinder.