Panel Replacement - Cargo Box Bridge Side Inner (Avalanche/EXT)

Panel Replacement - Cargo Box Bridge Side Inner (Avalanche)

Removal Procedure

1. Remove the rear compartment cover assembly.
2. Remove the panel - cargo box bridge center.




3. Remove the retaining screws (1) from the side inner panel.
4. Remove the side inner panel from the vehicle.

Installation Procedure




1. Install the inner side panel to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the retaining screws (1) to the inner side panel.

Tighten the inner side panel screws to 7 N.m (62 lb in).

3. Install the panel - cargo box bridge center.
4. Install the rear compartment cover assembly.