Instrument Panel Cluster (IPC) - Replacement

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) cluster trim plate bezel.
2. Remove the screws that retain the IP cluster to the IP assembly.




3. Remove the IP cluster from the vehicle by tilting the bottom of the cluster outward.
4. Disconnect the IP cluster harness from the IP cluster.

INSTALLATION PROCEDURE




1. Connect the IP cluster harness to the IP cluster.




2. Install the IP cluster onto the IP with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws that retain the IP cluster to the IP assembly.

Tighten
Tighten the screws to 2 N.m (18 lb in).

4. Install the IP cluster trim plate bezel.