High Mounted Stop Lamp Replacement - 1

REMOVAL PROCEDURE




1. Raise the lift glass.
2. Remove the retainers from the stop lamp.
3. Lower the lift glass.




4. Raise the stop lamp to disconnect the electrical connector from the lamp.
5. Remove the center high-mounted stop lamp from the vehicle.

INSTALLATION PROCEDURE




1. Connect the electrical harness to the stop lamp.
2. Install the center high-mounted stop lamp onto the vehicle.
3. Raise the lift glass.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the retainers into the holes.

Tighten
Tighten the retainers to 1.2 N.m (10 lb in).

5. Close the lift glass.