Luxury

KNEE BOLSTER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the IP cluster trim plate bezel.
2. Move the IP extension rearwards.




3. Remove the knee bolster screws.
4. Unsnap the top of the knee bolster from the IP assembly

INSTALLATION PROCEDURE




1. Snap the top of the knee bolster into the IP assembly.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the knee bolster screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Install the IP cluster trim plate bezel.
4. Install the IP extension to the IP.