Transfer Case Input Shaft Seal Replacement

Transfer Case Input Shaft Seal Replacement
^ Tools Required
- J 42733 Seal Installer

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case from the adapter.





3. Remove the input shaft seal from the transfer case.

Installation Procedure





Important: When installing the input shaft seal, make sure that the part numbers on the seal are facing outward (toward the technician). The input shaft seal should be even with the surface of the transfer case after installation.

1. Position the seal on the input shaft.
2. Using the J42738, install the input shaft seal in the transfer case.





3. Install the transfer case to the adapter.
4. Lower the vehicle. Refer to Vehicle Lifting.