Collision Avoidance and Parking Assist Systems: Service and Repair

INFORMATION CENTER TELLTALE ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the rear upper garnish molding.




2. Remove the 2 screws (1) retaining the information telltale.
3. Remove the information telltale from the garnish molding

INSTALLATION PROCEDURE




1. Install the information telltale to the garnish molding
2. Install the 2 retaining screws (1).

NOTE: Refer to fastener notice in service precautions.

Tighten the 2 screws to 2 N.m (18 lb in).

3. Install the garnish molding.