Mirror Replacement - Power Mirror

Mirror Replacement - Power

Removal Procedure

1. Remove the front side door trim panel. Service and Repair




2. Remove the insulator, if equipped.
3. Disconnect the electrical connector.




4. Remove the nuts securing the outside mirror to the door.
5. Remove the mirror from the door.

Installation Procedure




1. Install the outside mirror to the door. Press the mirror into place.




2. Connect the electrical connector.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the nuts in order to secure the outside mirror to the door.

Tighten
Tighten the outside mirror nuts to 9 N.m (80 lb in).

4. Install the insulator, if equipped.
5. Install the front side door trim panel.