Panel Replacement - Cargo Box Bridge Side Inner (EXT)

Panel Replacement - Cargo Box Bridge Side Inner (EXT)

Removal Procedure

1. Lower the end gate.
2. Remove the rear compartment cover assembly.
3. Remove the panel - cargo box bridge center.




4. Rotate a thin-bladed screwdriver in order to release all retainers.
5. Remove the side inner panel from the vehicle.

Installation Procedure






Important: In order to prevent water intrusion, ensure that all water seals are on retainers. If necessary, replace the retainers.

1. Install the inner side panel to the vehicle.
2. Install the panel - cargo box bridge center.
3. Install the rear compartment cover assembly.
4. Close the end gate.