Horn Switch

Horn Switch Replacement

Removal Procedure






Caution: Refer to Servicing the SM System Caution in Cautions and Notices.

1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module.
3. Remove the horn plunger from the steering column by pressing inward to the stop and rotating the horn plunger 90 degrees.





4. Disconnect the captured screws (1,4) to the horn contact plate (2) from the steering wheel (3).
5. Remove the horn switch (2) from the steering wheel (3).

Installation Procedure





1. Install the horn switch (2) to the steering wheel (3).

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Connect the captured screws (1.4) from the horn contact plate (2) to the steering wheel (3)
^ Tighten the screws to 5.5 Nm (50 inch lbs.).





3. Install the horn plunger to the steering column.
4. Install the inflator module.
5. Enable the SIR system.