Seat Riser Latch Assembly Replacement - Rear No. 2 (Bench Front Latch)

Seat Riser Latch Assembly Replacement - Rear No. 2 (Bench Front Latch)

Removal Procedure




1. Disengage the velcro strips (1) to gain access to the riser bolts




2. Remove the bolts (1) that retain the front riser (2) to the cushion frame.




3. Disconnect the cable (1) from the riser assembly.
4. Remove the riser assembly from the seat frame.

Installation Procedure




1. Install the riser assembly to the seat frame.
2. Connect the cable (1) to the riser assembly.






Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts (1) that retain the front riser (2) to the cushion frame.

Tighten the bolts to 53 N.m (39 lb ft).




4. Engage the velcro strips (1).