Instrument Panel (IP) - Trim Panel Replacement - Center

TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) CENTER

REMOVAL PROCEDURE




1. Remove the radio.
2. Remove the HVAC control.
3. Remove the center HVAC air outlet.
4. Remove the screws securing the instrument panel (I/P) center trim panel.

INSTALLATION PROCEDURE




1. Position the center trim panel to the I/P.
2. Install the screws securing the I/P center trim panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

3. Install the center HVAC air outlet.
4. Install the HVAC control.
5. Install the radio.