Seat Back Release Latch Replacement - Rear No. 1

SEAT BACK RELEASE LATCH REPLACEMENT - REAR NO. 1

REMOVAL PROCEDURE




1. Remove the screw (1) from the release assembly.
2. Disconnect the cable from the release assembly.
3. Remove the release assembly.

INSTALLATION PROCEDURE
1. Connect the release cable to the release latch assembly.




2. Install the latch assembly to the seat cushion frame with the mounting screw (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the latch assembly screw to 2 N.m (18 lb in).