Instrument Panel Cluster (IPC) - Replacement

INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

REMOVAL PROCEDURE
1. Remove the I/P cluster trim cover.




2. Remove the screws (2) securing the cluster to the I/P.




3. Install a small flat bladed tool (1) between the I/P cluster and the I/P.
4. Pry up on the I/P in order to release the retainers on the cluster.
5. Pull out on the cluster and disconnect the electrical connectors.

INSTALLATION PROCEDURE




1. Position the cluster on the I/P.
2. Connect the electrical connectors (1) on the back of the cluster.
3. Push the cluster into the I/P in order to lock in the cluster retainers.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the fasteners (2) in order to secure the cluster to the I/P.

Tighten the fasteners to 2 N.m (18 lb in).