Wheel Hub: Service and Repair

Wheel Bearing/Hub Replacement - Front (RWD)

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor. Refer to Brake Rotor Replacement - Front in Disc Brakes.





4. Disconnect the ABS electrical connector.
5. Remove the electrical connector from the splash shield.





6. Remove the wheel bearing/hub mounting bolts.
7. Remove the wheel bearing/hub.

Installation Procedure





1. Install the wheel bearing/hub.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the wheel bearing/hub mounting bolts.
Tighten the bolts to 135 Nm (100 ft. lbs.).





3. Install the electrical connector to the splash shield.
4. Connect the ABS electrical connector.
5. Install the brake rotor. Refer to Brake Rotor Replacement - Front in Disc Brakes.
6. Install the tire and wheel.
7. Lower the vehicle.