Brake Rotor/Disc

Brake Rotor Mounting Screw 14 Nm (124 inch lbs.)
Front Brake Rotors
Rotor Diameter 323.0 mm (12.7 inch)
Rotor Discard Thickness 30.7 mm (1.209 inch)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rotor Minimum Thickness after Refinishing 30.7 mm (1.209 inch)
Rotor Thickness (New) 32.20 mm (1.267 inch)
Rear Brake Rotors
Rotor Diameter 320.0 mm (12.6 inch)
Rotor Discard Thickness 24.0 mm (0.94 inch)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rotor Minimum Thickness after Refinishing 24.0 mm (0.944 inch)
Rotor Thickness New 26.0 mm (1.02 inch)

*All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.