Battery Replacement

BATTERY REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the battery negative cable (2).
2. Disconnect the battery positive cable (1) from the battery.




3. Remove the battery heat shield.




4. Remove the battery retainer bolt and battery retainer.
5. Remove the battery from the vehicle.

INSTALLATION PROCEDURE




1. Install the battery into the vehicle.
2. Install the battery retainer and bolt.

Tighten the bolt to 18 N.m (13 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the battery heat shield.




4. Connect the battery positive cable (1) to the battery.

Tighten the battery cable bolt to 17 N.m (13 lb ft).

5. Connect the battery negative cable (2).