A/C - Revised Air Temperature Actuator Replacement
Bulletin No.: 05-01-39-007Date: December 13, 2005
SERVICE MANUAL UPDATE
Subject:
Revised Air Temperature Actuator Replacement - Left Procedure
Models:
2004-2006 Cadillac SRX
This bulletin is being issued to revise the Air Temperature Actuator Replacement-Left procedure in the HVAC Systems-Automatic sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Air Temperature Actuator Replacement - Left
Removal Procedure
1. Remove the left side closeout panel. Refer to Closeout/Insulator Panel Replacement - Left.
2. Remove the left knee bolster. Refer to Knee Bolster Replacement.
3. Remove the left knee bolster bracket. Refer to Knee Bolster Bracket Replacement - Left.
4. If equipped with adjustable pedals, remove the 3 nuts retaining the adjustable accelerator pedal and reposition the accelerator pedal. Refer to Accelerator Pedal Assembly Replacement.
5. Remove the left air temperature actuator screws.
6. Remove the left air temperature actuator harness screw.
7. Disconnect the left air temperature actuator electrical connector from the actuator.
8. Remove the left air temperature actuator.
Installation Procedure
1. Install the left air temperature actuator.
Note:
Refer to Fastener Notice.
2. Install the left air temperature actuator harness screw.
Tighten
Tighten the screws to 1 N.m (9 lb in).
3. Connect the left air temperature actuator electrical connector to the actuator.
4. Install the left air temperature actuator screws.
Tighten
Tighten the screws to 1 N.m (9 lb in).
5. If equipped, install the adjustable accelerator pedal. Refer to Accelerator Pedal Assembly Replacement.
6. Install the knee bolster bracket. Refer to Knee Bolster Bracket Replacement - Left.
7. Install the knee bolster. Refer to Knee Bolster Replacement.
8. Install the closeout panel. Refer to Closeout/Insulator Panel Replacement - Left.
Warranty Information
Due to this procedure change, the labor time has been revised for this operation. The new labor time is shown.
Disclaimer