Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Liftgate

Removal Procedure

1. Open the liftgate.
2. Remove the liftgate trim panel.
3. Remove the liftgate latch bolts.




4. Remove the liftgate latch release cable from the latch.
5. Disconnect the electrical connectors from the latch.
6. Remove the liftgate latch from the liftgate.

Installation Procedure




1. Connect the electrical connectors to the liftgate latch.
2. Install the liftgate latch release cable to the liftgate latch.
3. Insert the liftgate latch into the liftgate.

Notice: Refer to Fastener Notice () in Service Precautions.

4. Install the bolts to secure the liftgate latch to the liftgate.

Tighten the latch bolts to 10 N.m (89 lb in).

5. Install the liftgate lid trim panel.
6. Close the liftgate.