Memory Positioning Module: Service and Repair

MEMORY SEAT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the front seat cushion.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Disconnect the electrical connectors from the heated seat module.




3. Remove the screws (1) retaining the memory seat module to the seat frame.
4. Remove the memory seat module.

INSTALLATION PROCEDURE




1. Install the memory seat module and install the memory seat module screws (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws 2 N.m (18 lb in).




2. Connect the electrical connections to the module.
3. Install the front seat cushion.
4. Calibrate the memory seat module for proper adjustable pedal operation. Refer to Adjustable Pedal Calibration in Accessories.
5. Calibrate the seat. Refer to Memory Seat Calibration Procedure.