Seat Back Cover and Pad Replacement - Rear No.1 - Right

SEAT BACK COVER AND PAD REPLACEMENT - REAR NO.1 - RIGHT

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the head restraints.
3. Remove the head restraint guides.
4. Remove the right seat cushion.




5. Remove the seat release latch screw (1).
6. Disconnect the release cables.
7. Remove the latch from the seat.
8. Remove the seat back cover.

INSTALLATION PROCEDURE
1. Install the seat back cover on to the seat back.
2. Install the seat release cable to the release latch.
3. Install the seat release latch to the seat.




4. Install the seat release latch screw (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw to 2 N.m (18 lb in).

5. Install the right seat cushion.
6. Install the head restraint guides.
7. Install the head restraints.
8. Install the seat in the vehicle.