Seat Back Replacement - Rear No.1 - Right

Seat Back Replacement - Rear No.1 - Right

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the right seat cushion.




3. Remove the pivot trim cover screws (1).
4. Remove the outer pivot covers.




5. Disconnect the seat release cables (2) from the seat adjuster.




6. Disconnect the J channel retainers (1).
7. Remove the seat back retaining bolts (2).




8. Remove the seat back retaining bolt (1).
9. Remove the seat back from the seat adjuster.

Installation Procedure

1. Install the seat back on to the seat adjuster.






Notice: Refer to Fastener Notice () in Service Precautions.

2. Install the seat back retaining bolts (2).

Tighten the bolts to 35 N.m (26 lb ft).




3. Install the seat back retaining bolt (1).

Tighten the bolt to 35 N.m (26 lb ft).




4. Connect the seat release cables (2) to the seat adjuster.




5. Connect the J channel retainers (1).




6. Install the pivot cover screws (1).

Tighten the screws to 2 N.m (18 lb in).

7. Install the seat cushion.
8. Install the seat into the vehicle.