Antenna Module - Programming and Setup

ANTENNA MODULE PROGRAMMING AND SETUP

PROGRAMMING AND SETUP PROCEDURES
Each of the following service procedures requires programming or setup procedures to be performed on the Radio.

ANTENNA MODULE REPLACEMENT
If the Driver side antenna module is replaced, the following procedure must be performed:

Without RPO UJ6
Perform the transmitter programming procedure for the radio antenna module. Refer to Transmitter Programming in Keyless Entry.

With RPO UJ6
Perform the Tire Pressure Learn procedure. Refer to Tire Pressure Sensor Learn in Tire Pressure Monitoring and the transmitter programming procedure for the radio antenna module. Refer to Transmitter Programming in Keyless Entry.