Antenna Module Replacement (Driver Side)

ANTENNA MODULE REPLACEMENT (DRIVER SIDE)

REMOVAL PROCEDURE
1. Remove the headliner.




2. Disconnect the coax cables.
3. Disconnect the electrical connector.
4. Slide the radio control module (1) off the mounting bracket.

INSTALLATION PROCEDURE




1. Install the radio control module (1) to the mounting bracket.
2. Connect all the electrical connectors.
3. Install the headliner.
4. Reprogram the keyless entry transmitter. Refer to Transmitter Programming in Keyless Entry.
5. Reprogram the tire pressure sensors. Refer to Tire Pressure Sensor Learn in Tire Pressure Monitoring.