Collision Avoidance and Parking Assist Systems: Service and Repair

INFORMATION CENTER TELLTALE ASSEMBLY REPLACEMENT (UTILITY)

REMOVAL PROCEDURE
1. Remove the rear quarter garnish molding.




2. Disconnect the electrical connector.
3. Remove the retaining screws (1).

INSTALLATION PROCEDURE




1. Install the information center telltale assembly to the garnish molding.
2. Install the retaining screws (1).

Tighten the retaining screws to 2 N.m (18 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the rear quarter garnish molding.