25. Camshaft Removal

Camshaft Removal





1. Remove the camshaft position (CMP) sensor bolt and the sensor.





2. Remove the camshaft retainer bolts and the retainer.





3. Notice: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.

Remove the camshaft.
1 Install the 3 M8 - 1.25 x 100 mm bolts in the camshaft front bolt holes.
2 Using the bolts as a handle, carefully rotate and pull the camshaft out of the engine block.
3 Remove the bolts from the front of the camshaft.