Rear Axle Lubricant Replacement (8.6 Inch Axle)

Rear Axle Lubricant Replacement (8.6 Inch Axle)

Removal Procedure




1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the fill plug.




3. Remove the rear axle housing cover.

Installation Procedure




1. Install the rear axle housing cover.
2. Fill the rear axle housing.
^ Use the proper fluid. Refer to Approximate Fluid Capacities.
^ For the correct capacity, refer to Fluid and Lubricant Recommendations.





Notice: Refer to Fastener Notice.

3. Install the fill plug.

Tighten the fill plug to 33 Nm (24 lb ft).