Radio Rear Speaker Replacement (Outer)
Radio Rear Speaker Replacement (Outer)
Removal Procedure
1. Remove the body side trim panel.
2. Remove the fasteners (2) securing the rear speaker.
3. Disconnect the electrical connector.
4. Remove the speaker.
Installation Procedure
1. Locate the speaker onto the studs (1) on the vehicle floor.
2. Connect the electrical connector.
Notice: Refer to Fastener Notice.
3. Install the fasteners (2) securing the speaker.
Tighten the fasteners to 9 N.m (80 lb in).
4. Install the body side trim panel.