Radiator Upper Grille Replacement (Base)

Radiator Upper Grille Replacement (Base)

Removal Procedure

1. Remove the upper fasteners from the front bumper fascia to form enough slack to pull backwards and access the grille.




2. Remove the push-in retainers (1) that hold the grille to the fascia.
3. Disengage the clips from the fascia at the bottom of the grille.
4. Remove the grille from the fascia.

Installation Procedure




1. Position the grille to the fascia, using the clips as guides to the pilot holes in the fascia.
2. Install the push-in retainers (1) that hold the grille to the fascia.
3. Position the fascia in place and install the fasteners that were removed. Refer to Front Bumper Fascia Replacement.