Roof Rail Rear Assist Handle Replacement

Roof Rail Rear Assist Handle Replacement

Removal Procedure

1. Remove the center pillar garnish trim.
2. Lower the headliner to access the assist handle fastener.




3. Remove the 2 screws (2) that retain the assist handle (1) to the roof.
4. Remove the assist handle.

Installation Procedure




1. Position the assist handle (1) to the roof.

Notice: Refer to Fastener Notice.

2. Install the two fasteners in order to retain the assist handle to the roof.

Tighten the 2 screws to 2 N.m (18 lb in).

3. Install the headliner.
4. Remove the center pillar garnish trim.