Side Door Opening Frame Garnish Molding Replacement

Side Door Opening Frame Garnish Molding Replacement

Removal Procedure

1. Remove the air bag screw cover from the garnish molding.




2. Remove the screw from the garnish molding (1).
3. Remove the side door garnish molding by pulling the panel from the locator holes.
4. Remove the seat belt guide from the garnish molding.
5. Remove the seat belt anchor bolt.
6. Slide the seat belt through the garnish molding.
7. Remove the garnish molding.

Installation Procedure

1. Insert the seat belt through the garnish molding.
2. Insert the seat belt guide into the garnish molding.




3. Align the retainers on the side door garnish molding (1) with the holes in the body pillar.
4. Push the panel inward in order to secure the retainers.
5. Install the seat belt anchor bolt.

Notice: Refer to Fastener Notice.

6. Install the garnish molding screw.

Tighten the screw to 2 N.m (18 lb in).

7. Install the air bag screw cover.