Rear Seat Number 1 Back Replacement - Left Side

Rear Seat Number 1 Back Replacement - Left Side

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the left seat cushion.




3. Remove the pivot trim cover screws (1).
4. Remove the outer pivot covers.




5. Disconnect the J-channel retainers (1).
6. Remove the seat back retaining bolts (2).
7. Remove the seat back from the seat adjuster.

Installation Procedure

1. Install the seat back on to the seat adjuster.






Notice: Refer to Fastener Notice.

2. Install the seat back retaining bolts (2).

Tighten the bolts to 35 N.m (26 lb ft).

3. Connect the J-channel retainers (1).




4. Install the pivot cover screws (1).

Tighten the screws to 2 N.m (18 lb in).

5. Install the seat cushion.
6. Install the seat into the vehicle.