Rear Seat Adjuster Replacement

Rear Seat Adjuster Replacement

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the right seat cushion.
3. Remove the left seat cushion.




4. Remove the pivot trim cover screws (1).
5. Remove the outer pivot covers.
6. Remove the right seat back.
7. Remove the left seat back.

Installation Procedure

1. Install the left seat back on to the seat adjuster.
2. Install the right seat back on to the adjuster.




3. Install the inner pivot covers.
4. Install the outer pivot covers.

Notice: Refer to Fastener Notice.

5. Install the pivot cover screws (1).

Tighten the pivot cover screws to 2 N.m (18 lb in).

6. Install the right seat cushion.
7. Install the left seat cushion.
8. Install the seat into the vehicle.