Fan Shroud: Service and Repair

Fan Shroud Replacement (LH2)

Removal Procedure




1. Remove the fan.
2. Lower the vehicle.
3. Disconnect the condenser tube from the fan shroud retainer clip.
4. Remove the cooling fan shroud retaining bolts.
5. Remove the cooling fan shroud.

Installation Procedure




1. Install the cooling fan shroud.

Notice: Refer to Fastener Notice.

2. Install the cooling fan shroud retaining bolts.

Tighten the bolts to 6.5 N.m (58 lb in).

3. Connect the condenser tube to the fan shroud retainer clip.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Install the fan.