Exhaust Manifold Heat Shield Replacement - Right Side

Exhaust Manifold Heat Shield Replacement - Right Side (LH2)

Removal Procedure

Caution: Refer to Exhaust Service Caution.

Caution: Refer to Protective Goggles and Glove Caution.




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the wire clips from the generator and generator bracket.
3. Remove the bolts securing the exhaust manifold heat shield to the exhaust manifold.
4. Remove the heat shield from the engine.

Installation Procedure




1. Install the exhaust manifold heat shield to the engine.

Notice: Refer to Fastener Notice.

2. Install the bolts securing the exhaust manifold heat shield to the manifold.

Tighten the exhaust manifold heat shield bolts to 10 N.m (89 lb in).

3. Connect the wire clips to the generator and generator bracket.
4. Lower the vehicle.