Front Seat Belt Replacement

Front Seat Belt Replacement

Removal Procedure

Caution: Refer to Restraint System Service Precautions.

1. Remove the front seat back trim cover.
2. Remove the front seat cover and pad.
3. Remove the screws retaining the roller assembly cover and remove the cover.




4. Remove the bolt retaining the seat belt retractor to the seat frame.




5. Remove the seat belt lower retaining nut (2).
6. Remove the seat belt retractor assembly.

Installation Procedure

1. Ensure that the seat belt is not twisted before installing the retractor.




2. Install the seat belt (2) to the mounting stud.
Ensure that the anti-rotation tab on the seat belt is located properly in the seat frame before tightening the retaining nut.

Notice: Refer to Fastener Notice.

3. Install the retaining nut.

Tighten the nut to 42 N.m (31 lb ft).

4. Position the seat belt over the roller assembly.
Ensure that the seat belt is not twisted.




5. Install the seat belt retractor.
Ensure that the anti-rotation tab on the seat belt retractor is located properly on the seat frame before tightening the retractor fastener.
6. Install the retaining bolt.

Tighten the bolt to 26 N.m (19 lb ft).

7. Install the roller assembly cover.
8. Install the roller assembly screws.

Tighten the fasteners to 5 N.m (44 lb in).

9. Ensure proper operation of the seat belt retractor.
10. Install the seat back cover.
11. Install the front seat.
12. Confirm proper operation of the seat belt retractors.