Dampener/Tuned Absorber Replacement

Dampener/Tuned Absorber Replacement

Removal Procedure




1. Remove the rear propeller shaft.
2. Support the transmission with a suitable jack and a block of wood.
3. Remove the transmission mount-to-body bolts.




4. Remove the transmission mount-to-transmission bolts.
5. Remove the transmission mount.
6. Lower the transmission/transfer case assembly.




7. Remove the dampener bolts (16).
8. Remove the dampener (300) from the transfer case.

Installation Procedure




1. Install the dampener (300) to the transfer case.

Notice: Refer to Fastener Notice.

2. Install the dampener bolts (16).

Tighten the dampener bolts to 27 N.m (20 lb ft).

3. Lower the transmission/transfer case assembly.




4. Install the transmission mount.
5. Install the transmission mount-to-transmission bolts.

Tighten the bolts to 110 N.m (81 lb ft).




6. Install the transmission mount-to-body bolts.

Tighten the bolts to 60 N.m (44 lb ft).

7. Remove the support from the transmission.
8. Install the rear propeller shaft.