B1328
DTC B1328
Circuit Description
The dash integration module (DIM) has an internal voltage sensor with a dedicated circuit that checks the battery positive voltage and battery negative circuit voltage to determine if it is between 9-15.9 volts.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC B1328 Device Power Circuit High
Conditions for Running the DTC
This DTC shall run only if the DIM has power, ground, and the ignition is not in START mode. This DTC shall execute regardless of the battery voltage, except when the DTC B1390 is set current.
Conditions for Setting the DTC
This DTC shall be set as current when the voltage is greater than 15.5 volts for 1,200 milliseconds.
Action Taken When the DTC Sets
A message shall be sent out on the class 2 lines to notify all other modules of high battery voltage.
Conditions for Clearing the MIL/DTC
In order to clear the DTC from a current status the voltage shall be less than 16 volts for 1,200 milliseconds.
Diagnostic Aids
DTC B1328 may set if the vehicle is connected to a battery charger on fast or boost charge.
Test
