Fuel Injector Sight Shield Replacement

Fuel Injector Sight Shield Replacement

Removal Procedure

1. Remove the cross car brace.




2. Disengage the cover/shield from the ball studs by pulling up firmly on the right rear and left front of the engine cover.
3. Remove the engine cover/sight shield.

Installation Procedure




1. Position the engine cover/sight shield over the intake manifold so the grommets are aligned with the ball studs.
2. Press the engine cover/sight shield down firmly near the ball studs in order to install the engine cover/sight shield.
3. Install the cross car brace.