Front Suspension

Stabilizer Shaft Link Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.





Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.

2. Remove the stabilizer shaft link upper retaining nut.
3. Remove the stabilizer shaft link lower retaining nut.
4. Remove the stabilizer shaft link from the vehicle.

Installation Procedure




1. Install the stabilizer shaft link to the vehicle.

Important: Do not tighten the nuts at this time.

Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.

2. Install the stabilizer shaft link lower retaining nut.

Notice: Refer to Fastener Notice.

3. Install the stabilizer shaft link upper retaining nut.

Tighten the nuts to 115 N.m (95 lb ft).

4. Lower the vehicle.