Tow Sensor: Service and Repair

Theft Deterrent Vehicle Inclination Sensor Replacement

Removal Procedure

1. Remove the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement (w/TB5) (Service and Repair)Body Side Rear Trim Panel Replacement (w/o TB5) (Service and Repair) .




2. Disconnect the electrical connector on the inclination sensor (1).
3. Remove the inclination sensor from the bracket.



Installation Procedure





1. Install the inclination sensor (1) to the bracket.
2. Connect the electrical connector.
3. Install the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement (w/TB5) (Service and Repair)Body Side Rear Trim Panel Replacement (w/o TB5) (Service and Repair) .