Power Steering Cooler Pipe/Hose Replacement (Outlet With or Without V92)

Power Steering Cooler Pipe/Hose Replacement (Outlet With or Without V92)

Removal Procedure

1. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
2. Remove the front air deflector. Refer to Front Air Deflector Replacement (Service and Repair) .
3. Place drain pans underneath the vehicle as needed.




4. Disconnect the power steering cooler outlet hose from the power steering cooler inlet/outlet hose assembly (with V92) or the power steering fluid cooler (without V92).




5. Remove the power steering cooler outlet hose bracket bolts.




6. Disconnect the power steering cooler outlet hose from the remote power steering fluid reservoir.
7. Remove the power steering cooler outlet hose from the vehicle.



Installation Procedure

1. Install the power steering cooler outlet hose to the vehicle.




2. Connect the power steering cooler outlet hose to the remote power steering fluid reservoir.





Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the power steering cooler outlet hose bracket bolts.

Tighten the bolts to 10 N.m (89 lb in).





4. Connect the power steering cooler outlet hose to the power steering cooler inlet/outlet hose assembly (with V92) or the power steering fluid cooler (without V92).
5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
6. Install the front air deflector. Refer to Front Air Deflector Replacement (Service and Repair) .
7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (Service and Repair) .